Other Valves

  • Pipe Line Sight Glass

    Pipe Line Sight Glass

    DN:DN50-DN150 PN:PN1.0MPa/PN1.6MPa Connection type:Welding Body material:CF8、CF8M、CF3M、904L、C4、TA2 Working temperature:-29℃≤T≤80℃  The pipeline sight glass is an accessory installed in the middle of the pipeline, which is convenient for users to observe the flow state of materials in the pipeline. There are many kinds of pipe mirrors, such as pipe through mirror, impeller mirror, swing mirror, float mirror, rotor mirror and so on. The types of pipe mirrors include the above, and mor...
  • Thermodynamic disc type steam trap

    Thermodynamic disc type steam trap

    1. The thermal power type steam trap can work in the whole working range without adjusting or changing the internal parts.
    2. Compact structure, simple, light weight, in terms of its size, large displacement.
    3. Thermal power type steam trap can be used for high pressure and superheated steam, water hammer and vibration resistance, stainless steel structure can resist condensation water corrosion.
    4. The thermal power trap will not be damaged by freezing, but the disc edge is easy to wear when the disc is in the vertical direction and directly discharged into the atmosphere.
    5. Since the disc is the only moving part, it is easy to maintain and there is no need to remove the drain valve from the pipeline.

  • Foot valve

    Foot valve

    The foot valve, also known as check valve, is a low-pressure flat valve. Its function is to ensure the one-way flow of liquid in the suction pipe and make the pump work normally. When the pump stops working for a short time, the liquid can not return to the water source tank and the suction pipe is full of liquid, which is conducive to the start of the pump

  • JIS foot valve

    JIS foot valve

    The foot valve, also known as check valve, is a low-pressure flat valve. Its function is to ensure the one-way flow of liquid in the suction pipe and make the pump work normally. When the pump stops working for a short time, the liquid can not return to the water source tank and the suction pipe is full of liquid, which is conducive to the start of the pump

    JIS standard

  • Pneumatic Y-shaped angle seat valve

    Pneumatic Y-shaped angle seat valve

    1. Visual position indication;
    2. It is easy to connect;
    3. The pneumatic angle seat valve has many control modes;
    4. Without water hammer, the water hammer (water impact force) is absorbed when the fluid flows from under the valve stem;
    5. Easy to install: pneumatic head can rotate 360 degrees. One or two limit switches can be installed conveniently;
    6. Smaller pneumatic actuator is required: when the fluid flows from the top of the valve stem, a smaller control head can be selected;
    7. Advanced pneumatic controller;
    8. Advanced body mechanism.

  • Single ball air valve

    Single ball air valve

    To be used as the regulating and cut off device in the fluid pipeline of following system:
    • Water • Electricity
    • Sewage • Medicine
    • Construction • Metallurgy
    • Food • Textile